Geoscan Lite is a professional solution for everyone who needs to observe the area in details. It is applied for fast and accurate data acquisition in agriculture, geodesy, ecological survey and construction.
Use captured photos to create an orthophoto, an elevation model or a 3D model.
Application scenarios
Cadastre
Mapping
Mining
Public road system
Construction
Agriculture
Environmental monitoring
Forestry management
Aerial photography with Geoscan Lite and automatic data processing in Agisoft Metashape allow you to get precise orthophotos, DEM and DTM in a geocentric as well as local coordinate system even without a H/V equipment (with a GNSS receiver onboard).
The data processed can be used for cadastre, including that in populated areas, and maps and plans building of 1:2000, 1:1000 and 1:500 scales.
Onboard —
Sony RX1R II
and GNSS receiver U-blox or
Sony ZV-E10 and GNSS receiver U-blox
Flight stability excludes any blurry images.
With Sony RX1R II, maximum coverage 500 ha at 3 cm/px GSD and 1400 ha at 10 cm/px GSD
It takes 10 minutes to prepare the UAV for a launch, and the whole flight is autonomous. Geoscan Lite flies along the route, chooses an optimal trajectory and flies back to its take-off location.
А built-in high-accuracy GNSS receiver can operate with GPS/GLONASS systems at L1/L2 frequencies. It allows achieving 1.5* cm accuracy of projection centers coordinates using PPK/PPP methods even with long baselines.
*actual accuracy depends on baseline length and measurement conditions (ionosphere, troposphere, visible satellites geometry, and multipath effect).
Coordinates accuracy
up to 1.5 cm
Aerodynamic characteristics allow Geoscan Lite to work in severe weather conditions. It does not fall into a tailspin and deviate from a route. Having completed its flight mission the UAV opens its parachute and softly lands on preset point.
With Geoscan Planner your laptop turns into a ground control station in a single click. You can plan the flight, run diagnostics and keep track of the telemetry signals on the same screen.
Select the surveying area and let the application do the rest. Also, you can use Geoscan Planner to look through the pictures immediately after the landing to make sure that all the territory has been surveyed.
The Geoscan Planner software makes it possible to manage a flight mission for surveying areal and linear objects, using various flight modes (by points, based on terrain, etc.). Import KML and KMZ files, use different cartographic bases, control the flight, and adjust the mission while working with the UAV. After the flight is completed, the software creates a RINEX file with the times of image capture.
A durable IP67 case is provided to store the UAV. It protects the quadcopter from rain, snow or dirt as well as ensures its safety during transportation. Equipped with wheels and a retractable handle, the case can be rolled on the ground and easily relocated even over long distances.
Launcher can be easily packed in a soft protection case and stored until next flight.
Key characteristics
Max flight time:
80 min
Max route length:
100 km
Max coverage in one flight with Sony RX1R II
500 ha (3 cm/px)
1400 ha (10 cm/px)
Max flight altitude (ASL):
4000 m
Motor type:
Electric
Max radio range:
40 km
Wingspan:
1.3 m
Take-off preparation time:
10 min
Cruise speed:
80 km/h
Take-off/landing:
From launcher / by parachute
Take-off weight:
3.1 kg
Temperature:
-20 to +40 °С
What’s included
2 pcs. 4S, 11300 mAh
(size:115x19x16 cm, gr.weigh.: 7 kg)
(size 80x52x31 cm)
Geoscan Lite, an UAV with a GNSS receiver
Launcher in transport bag
(size:115x19x16 cm, gr.weigh.: 7 kg)
Transport case
(size 80x52x31 cm)
Sony RX1R II or Sony ZV-E10
Spare parts
Radio modem
Fins
Charging station
Batteries, 2 pcs. 4S, 11300 mAh
- In-depth individual UAV training course (remotely or in person)
- Individual software training course (remotely or in person)
If you have any questions about technical support, contact us by email: support@geoscan.ru